Ipod Nano, Car Dock Help, Is this possible?
Well I went out and bought a 2 Gig, Black Nano, I was sick of my Ishuffle with no screen. I will keep that for work outside and gym time. But the Nano will need to be docked. I plan on buying a Pioneer CD-IB100, iPod interface adapter. My headunit would display Playlist names song names and all that good stuff, I would be able to control my Ipod via my remote for my HU or my HU buttons themselves.
(Note: I know they make 100s of types of Radio FM transmitters, but I went to a local Tweeter and played with all of these and they were over all pretty weak. I also read alot of reviews with mixed results, That is not a road I want to go down.)
The unit is a pretty simple hook up, IP BUS, Ground and 12 volt & IPOD.
Here's where I have the issues. All of the IPOD holders for the Nano just grab the vent or stick to the dash.
I want to take an Apple Ipod Nano dock, and mount it in my car somehow.
Option 1:
Simply place the dock station in the little change area. Leave it exposed and out in the open.
Option 2:
Since I don't smoke take out the ash tray, and hack out the back, and fiberglass or mount the dock into the ash tray. (Hard to take a picture of without dock.)
I would probably buy a dock from the local Apple Store.
Does anyone know if there would be an issue with this?
I will call Panasonic tommorrow to make sure.
The Interface is Ipod Nano Compatiable.
The Interface can be ran through a dock.
I will go to the Apple store and find out.
If the dock will be able to be powered by the interface.
See if there is any others issues I may encounter.
Footnotes:
Looking for Ipod Nano plug facts.
Ashtray or out in the open coint tray install?
General Input welcome.

(Note: I know they make 100s of types of Radio FM transmitters, but I went to a local Tweeter and played with all of these and they were over all pretty weak. I also read alot of reviews with mixed results, That is not a road I want to go down.)
The unit is a pretty simple hook up, IP BUS, Ground and 12 volt & IPOD.
Here's where I have the issues. All of the IPOD holders for the Nano just grab the vent or stick to the dash.
I want to take an Apple Ipod Nano dock, and mount it in my car somehow.

Option 1:

Simply place the dock station in the little change area. Leave it exposed and out in the open.
Option 2:
Since I don't smoke take out the ash tray, and hack out the back, and fiberglass or mount the dock into the ash tray. (Hard to take a picture of without dock.)
I would probably buy a dock from the local Apple Store.
Does anyone know if there would be an issue with this?
I will call Panasonic tommorrow to make sure.
The Interface is Ipod Nano Compatiable.
The Interface can be ran through a dock.
I will go to the Apple store and find out.
If the dock will be able to be powered by the interface.
See if there is any others issues I may encounter.
Footnotes:
Looking for Ipod Nano plug facts.
Ashtray or out in the open coint tray install?
General Input welcome.

[Silverstars|Nokya Yellow Fogs|Black Clear Corners|Pioneer DEH-P7700MP|Kicker 15" CompVR|Hifonics Amp|Knuconceptz]
- Mossy
- SolaraGuy Driver
- Posts: 277
- Joined: Fri Sep 12, 2003 7:28 pm
- Location: Massachusetts