running cables to the trunk.

[Anik321]

if I didnt want the wires to show, how else (besides running them over the back seat) would I run them to the trunk ?

is there anyway to run them underneath/through the backseat without having to remove them ?

I need to run very thick wires (8 gauge) for an inverter. Please help.

I did search, a little

[Mole]

for a clean install, you're going to have to take out your seats.

[SolaraGuy22]

http://www.zer0.info/solaraguy/viewtopic.php?t=14453&highlight=hide+wires


Nice first post. Welcome

But yeah, you should just have to run them along the side door. I started from the back and moved forward, it worked out better that way. If you have any trouble let me know, i'll take some pictures.

-Anthony

[pervo]

8 gauge is not very thick- shouldnt be a prob at all

ive got 1/0

remove the seat (four bolts) , remove the trim around the door, pull off the back seat (just snaps off)

should take about 15min... quite simple

[Anik321]

Solaraguy22: Apologies. thats why they call us newbies. I would really appreciate it if you could take a few picture.

pervo: where are the four bolts for the seat ? could you take a picture as well ?

man i suck at this

thank guys !

[SolaraGuy22]

No, I wasn't being sarcastic. Sorry if it came off that way. I will take some pictures for you tomorrow afternoon, if not then definately by the weekend.

Fill out your profile a little more, tell us where your at and what you do. Also check out CarDomain.com and make a site when you get some time.

See ya,
-Anthony

[562solara02]

i ran my wire in from the rear side panels, cant see them and there 4 gauge

[Grazi07]

I had no trouble running a 4 guage and I didn't have to remove seats or trim panels. I was able to tuck it under the trim and hide all the wiring