[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Remote starts for the solara.
Page 2 of 3

PostPosted: Sun Jan 05, 2003 10:15 am
by ICUFG
Yepper

PostPosted: Sun Jan 05, 2003 12:23 pm
by Jackass-Jeff
can i rig it so both doors unlock when I tap the unlock once? I hate hearing all those beeps... (i know i can disable the beeps... but it's cool... haha)

PostPosted: Sun Jan 05, 2003 12:31 pm
by ICUFG
If you are talking about the stock keyless I dont think that you can get driver door priority off. I didnt install it on my alarm I hate that option too.

PostPosted: Sun Jan 05, 2003 1:01 pm
by Yanks0114
hows the range on your alarm for remote starting and then how far is the paging range

PostPosted: Sun Jan 05, 2003 1:04 pm
by ICUFG
1400ft with no interference

PostPosted: Sun Jan 05, 2003 1:14 pm
by Yanks0114
Can you acheive that range or is it just theorhetical

PostPosted: Sun Jan 05, 2003 1:18 pm
by ICUFG
Honestly Ive tried only about 1000ft through a building, it worked fine.

PostPosted: Sun Jan 05, 2003 1:47 pm
by Gunman
thats pretty good, i know the viper claims 1/4 mile

PostPosted: Tue Jan 07, 2003 7:32 pm
by Missay
ICUFG wrote:Honestly Ive tried only about 1000ft through a building, it worked fine.


you don't understand how upset i get at everyone i know who can start their remote starter through a building and i can't even get it to start w/ out effort from 10-20ft away through a glass window :roll:

PostPosted: Tue Jan 07, 2003 8:46 pm
by ICUFG
If I were you Melissa I would take it back and bat your eyelashes at them to see if they can fix it, you sould be getting alot more distance than that.

PostPosted: Tue Jan 07, 2003 9:09 pm
by Missay
i tried that...they "looked at it"...installed the grind protector (watever the hell that did) and said it was fine.

so i don't know what to do now..my dad is being a jerk bout it and won't do anything bout it. i might just bring it to someone else and see how much it would cost me to have them look at it and possible fix it.

how far am i suppose to get w/ the valet starter?

PostPosted: Tue Jan 07, 2003 9:10 pm
by Gunman
300FT on the extended range 552t

PostPosted: Tue Jan 07, 2003 9:13 pm
by ICUFG
Have you tried replacing the battery in the remote, those remotes sit on the shelf a long time and some times they are like cars you let them sit for a while without starting and they go dead.

PostPosted: Tue Jan 07, 2003 9:24 pm
by Missay
well i got two remotes, and they're both the same. i'm fed up..i just want it taken out!

the other wierd thing is that, when it does work, it takes 2 starts to actually start. the first time i get it to take the signal it sounds like it's about to catch the starter, but then it stalls out before it turns over. the second time it catches and starts. really weird.

PostPosted: Tue Jan 07, 2003 9:26 pm
by ICUFG
you can adjust that but the installer has to do it sounds like you need to take it to someone who knows what they are doing.