[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - 1999 Expansion Valve
Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.

1999 Expansion Valve

1999 Expansion Valve

Postby solar4 » Sun Apr 25, 2010 4:04 pm

I am looking for the best way to access the valve to replace it. Do I need to go through the glove box and remove the blower assy (from the right)? Or do I need to pull the dash out (access from above)? I can see the HP & LP lines where they come through the right side of the firewall. They immediately make a 90 turn following the upper backside of the firewall over towards the center of the car.

Any tips would be greatly appreciated!
solar4
Just Licensed SolaraGuy
 
Posts: 1
Joined: Sun Apr 25, 2010 3:58 pm

Postby Mole » Sun Apr 25, 2010 5:18 pm

sounds like the A/C ?

(either way i have no clue how to attack it)
the power of 8
User avatar
Mole
molerator
molerator
 
Posts: 1677884
Joined: Sun Apr 20, 2003 12:25 pm
Location: Glendale, Ca

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 31 guests