[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - P0172 code
Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.

P0172 code

P0172 code

Postby SdeA » Tue Jul 14, 2009 1:30 pm

My car is throwing P0172 code, I can't pass smog unless i fix that problem. Anyone know how do I fix it?
User avatar
SdeA
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 730
Joined: Mon Apr 03, 2006 4:02 pm
Location: Garden Grove, So Cal

Postby Ilovemylara » Tue Jul 14, 2009 2:21 pm

Vacumn leaks will usually throw that code. Spray engine starter fluid all around any vacumn lines in ur engine bay, if the rpms start to go up, you've found your leak.
User avatar
Ilovemylara
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1264
Joined: Tue Jul 22, 2008 12:41 am
Location: Chevrolet, USA

Postby SdeA » Tue Jul 14, 2009 3:27 pm

^^ Thank you, I will do that first thing in the morning.
User avatar
SdeA
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 730
Joined: Mon Apr 03, 2006 4:02 pm
Location: Garden Grove, So Cal

Postby solara90 » Tue Jul 14, 2009 3:39 pm

also check your MAF and clean it
02 solara 2az

Image
User avatar
solara90
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 552
Joined: Sun Oct 05, 2008 3:03 pm
Location: appleton, wisconsin

Postby D-money » Tue Jul 14, 2009 3:42 pm

a vacuum leak would cause it to run too lean that is not the issue in this case dont waste your time looking for a leak. if you havent already removed the black box for the cpe do it now and reset the ecu my guess is this is your problem
ImageImage
01 SLE V6 (Pic Edit Done by Garrryyunit)
User avatar
D-money
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1102
Joined: Wed Feb 25, 2009 1:18 pm
Location: Huntington Beach SoCal Chapter

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 35 guests