Seat disassembly instructions?

by **mazen222** » Tue Jul 14, 2009 11:25 am

Does anyone here know how to disassemble the driver side seat from the Gen 1?

I mostly want to remove the butt leather piece and the one where the back rests on out of the car.

I'm afraid to brake the electrical motor controls.

(if i'm able to do that, i will soon provide a tutorial on how to install heated/cooled oem seats :wink:

)

Thanks,
Mazen

by **Ilovemylara** » Tue Jul 14, 2009 11:44 am

Not sure about the back rest, but to remove the butt piece, you'll need to take the seat off the car. Once its off the car, I think there are 4 c-rings on the bottom, that hold the sides on, then you just remove the buttons for the power controls, and the cover underneath them (this all just pops off) and pry the cover off the metal lip. Beware, those c-rings are a pain to put back on.

by **mazen222** » Tue Jul 14, 2009 12:58 pm

Ilovemylara wrote:Not sure about the back rest, but to remove the butt piece, you'll need to take the seat off the car.

how do i do that? do i remove from the tracks?

by **D-money** » Tue Jul 14, 2009 1:03 pm

there are 4 bolts that hold it down 2 in the front and 2 in the back undo those and there are two plugs under the seat that you need to unplug then itcomes right out its pretty simple

by **yaddadaimsayin** » Tue Jul 14, 2009 1:58 pm

i already got the heated seats, but cooled seats?? that could prove useful in this triple digit weather!

good luck Mazen

by **mazen222** » Sun Jul 19, 2009 5:17 pm

D-money wrote:there are 4 bolts that hold it down 2 in the front and 2 in the back undo those and there are two plugs under the seat that you need to unplug then itcomes right out its pretty simple

are you refering to the bolts that hold the tracks to the floor?

they seam to be tightened as hell!

by **Ilovemylara** » Sun Jul 19, 2009 5:26 pm

mazen222 wrote:
D-money wrote:there are 4 bolts that hold it down 2 in the front and 2 in the back undo those and there are two plugs under the seat that you need to unplug then itcomes right out its pretty simple

are you refering to the bolts that hold the tracks to the floor?

they seam to be tightened as hell!

They'll come out, it just takes some Muscle

by **mazen222** » Sun Jul 19, 2009 5:26 pm

haha ok, didn't wanna brake something

by **Skew** » Mon Jul 20, 2009 3:02 pm

Whats a good racing seat brand?

by **Ilovemylara** » Mon Jul 20, 2009 3:05 pm

If you can afford em, Sparco.

Seat disassembly instructions?

Seat disassembly instructions?

Who is online