I swear I forgot!!

[Paladin06Greg]

A friend has asked me and I swear I forgot the stock injector size for the 2000 1MZ engine.

Please help.

[Paladin06Greg]

Damn, I guess I'm not the only one..

[that1mexguy]

heck i dont think i ever knew.... I remember seeing a post before but we are talking yrs ago!

[Dawgz]

i dono if this is what ur looking for but the mechanic at toyota said 88cc?

[Paladin06Greg]

That can not be right. More like 270 to 280 maybe.

i dono if this is what ur looking for but the mechanic at toyota said 88cc?

[Jon11582]

I found these through Search. They cite 210cc

Mole:
http://www.solaraguy.org/viewtopic.php?t=5939

JoeB:
http://www.solaraguy.org/viewtopic.php?t=6529

[Paladin06Greg]

Wow, that low. Thx

I found these through Search. They cite 210cc

Mole:
http://www.solaraguy.org/viewtopic.php?t=5939

JoeB:
http://www.solaraguy.org/viewtopic.php?t=6529

[dominoSLEV6]

NO NO NO NO NO. Does not sound right so I searched and came up with this on MR2 forums. I'll keep looking around, but for now I wouldn't get 210's.

"1mz injectors are deffinitely smaller than supra n/a injectors...
stock 1MZ injectors... ~260cc at 50psi average....
2jz-ge (n/a) injectors... ~330cc at 38psi average...."

"And remember that's for later 1mz-fe's.
The first little generation there still used 41psi & i think somewhere around 240-245cc injectors, but it's been quite awhile, so take that with a grain of salt."

"The accepted range for late model 1MZs is 240-292cc/min at 44-50 psi with no vacuum."

Found here...

http://www.mr2board.com/forums/mk-2-v6/ ... tions.html

That 2nd link above also uses 210 as an example not as what they are.

-chris

[Paladin06Greg]

Yea that supports what I was able to get from Toyota.

NO NO NO NO NO. Does not sound right so I searched and came up with this on MR2 forums. I'll keep looking around, but for now I wouldn't get 210's.

"1mz injectors are deffinitely smaller than supra n/a injectors...
stock 1MZ injectors... ~260cc at 50psi average....
2jz-ge (n/a) injectors... ~330cc at 38psi average...."

"And remember that's for later 1mz-fe's.
The first little generation there still used 41psi & i think somewhere around 240-245cc injectors, but it's been quite awhile, so take that with a grain of salt."

"The accepted range for late model 1MZs is 240-292cc/min at 44-50 psi with no vacuum."

Found here...

http://www.mr2board.com/forums/mk-2-v6/ ... tions.html

That 2nd link above also uses 210 as an example not as what they are.

-chris