[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Once again.... The damned "Thunk, Clunk" sound

Skip to content

Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.
Post a reply

Once again.... The damned "Thunk, Clunk" sound

Postby GreenSolara01 » Sun Aug 24, 2008 2:44 pm

I had similar noises. I looked up the torque specs for all suspension connections. Once everything was tightened down it all stopped. BTW the end links are a pain due to that 5mm Allen in the middle.
User avatar
GreenSolara01
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 497
Joined: Sat Oct 27, 2007 4:29 pm
Location: East Coast
Top

Postby Dawgz » Sun Aug 24, 2008 4:18 pm

when we took out the rear struts on my car to put in the tokicos...Adam found out that the mount wasnt installed correctly and thats why it was clunking.


Theres a notch on the strut shaft that goes into the mount, if that notch doesnt go in correctly, and u torque everything down, itll make noise...but i dono how it is with coilover's mounts and wat not...just puttn it out there for ya.
--=Black on Black=-- (Sold)
User avatar
Dawgz
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4678
Joined: Fri Jul 16, 2004 2:28 pm
Top

Postby sydemoid » Mon Aug 25, 2008 4:29 pm

checked dat already, JIC's come pre-assembled.

the only thing that moves "freely" are the control arms.

gonna order some soon, cuz I think that toyota built these with rubber inserts to absorb the shock, so they would wear out, also noticed that only the right hand side arms are available... which happens to be the side that is making the noise.
Geeks get it done, while Nerds whimper and call for mommie.
sydemoid
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 583
Joined: Wed Aug 31, 2005 10:51 pm
Location: Las Vegas
Top
Previous
Post a reply

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 24 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net