Odometer 1-20 settings???

[99BlackSandv6]

No I think the only thing that controls the brightness of DRLs is the resistor under the hood. But check it out on the Sienna, see if any other models do this.

[Savoiskiy]

My Gen2 shows 000000000 and resets MAINT indicator (oil change reminder) if you hold odometer button when turning the ignition. Do Gen1's have MAINT indicator on the instrument panel?

[GreenSolara01]

just tried it in the solara, it was at 6. I'm going to try it in a 98 sienna this afternoon. I did notice however while i was driving it the DRL are dimmer then regular headlights. Maybe this 1-20 is a dimmer for the drl?

WAHT!? come on, realy?

[GreenSolara01]

I think this will only work on the same plat form as gen 1 solaras. gen 2s can use it to reset mant light and turn off seat belt chime.

Gen ones we have 1-20 of madness

I set mine to 1 and I checked today it was back on 6. I set it back to one again, then checked to confirm it was on 1 and it still was. I will check it in a few days to see if it goes back to six on its own.

I was playing with a code reader at the time to see if all the moniters were still on and they all were working. I did a reset for fun, it might have put it back to six. I'm not really sure.

I tryed it in an 01 RAV4, nothing happened.

[GreeKAvaLoN]

well it's just a thought lol. I no longer have the solara to play with it =[ so you guys are on your own now lol. I'm going to try it possibly tonight or in the morning tomorrow on a 98 sienna.

[GreeKAvaLoN]

well surprising enough i tried it on a 1998 Toyota Sienna LE v6 1mzfe blah blah and it did the same thing and set to 6. So obviously the default is 6. The gauge cluster also seems to be shared with the camry and with the solara though. So pretty much all 1mz's do this..

edit: sorry not 1mz's all the MC_10 chassis seem to do this?

[GreenSolara01]

well surprising enough i tried it on a 1998 Toyota Sienna LE v6 1mzfe blah blah and it did the same thing and set to 6. So obviously the default is 6. The gauge cluster also seems to be shared with the camry and with the solara though. So pretty much all 1mz's do this..

edit: sorry not 1mz's all the MC_10 chassis seem to do this?

what year is you ava?

[GreeKAvaLoN]

1997 - i don't have a digital odometer like you guys it like manually rolls over. so it shouldnt manually roll over to a number lol

[99BlackSandv6]

^ Greek said his avalon has an analog odo, so he can't do this. If that's what you were asking.

EDIT: my bad me and Greek posted at the same time.

[GreenSolara01]

thanks for trying it on the Sen.

[GreeKAvaLoN]

oh ya, the sienna does NOT have daytime running lights so thats also out. do you guys maybe have multiple TRIP meters? idk i'm just throwing options out there lol

[GreenSolara01]

any one know spainish?

http://www.motortribe.it/community/forum/f80/menu-segreto-bc-e85-28481/

This link might be helpful but I cant read all of it.

[GreenSolara01]

Undocumented Functions Performed by the OBC
2nd Generation OBC (1986-1987)

Hidden Functions:
Fuel in Tank: Press "1000" & "1 " Buttons
Coding Plug Type: Press "100" & "1" simultaneously
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3rd Generation OBC (1988 +)

Wwhen you press the 1000 and 10 buttons
together code--? appears!
as codes you have a chance between 00 through 29
not all codes work but some do


Numbers explained:

OBC Code Settings (Rough translation):

1. Display test (Lights up the whole display)
2. Current consumption (Liters/100km)
3. Current consumption (Liters/hour)
4. Average consumption (Liters/100km)
5. Current range.
6. N/A
7. Average fuel in tank (liters)
8. Current speed (kph)
9. System voltage at Term. "R" (Battery voltage)
10. Country/Language (US, Spa, Ger, Jap, etc.)
11. Units am/pm
12. Average Speed
13. ETA
14. Date of Software Mask
15. Production Diagnosis
16. ""
17. Display Vehicle specific Data
18. Alarm Changeover (cont. vs. intermittent OBC chime)
19. Lock/Unlock OBC
20. Correction factor for fuel consumption ( DO NOT ALTER)
21. Reset all defect codes (Does NOT reset the Service Light)

http://www.bieveien.com/home/bmw/obc/obc_tips.htm

[GreeKAvaLoN]

but i know that my bmw z3 does the same thing, opening up test menus and other stuff.....

Im trying to research this.....

I found something simular except for a bmw

Instructions to access the hidden OBC functions:
1. Hold Trip Reset while turning ignition key to on position
2. OBC should show "Test"
3. Use Trip Reset to select function 19.0 that unlocks all the features
3. Wait for display to show "Off"
4. Depress Trip Reset for 1/4 second and release it
5. With no delay press Trip Reset several times to select one of the following function s

BMW E46 On-Board Computer (OBC) Hidden Codes
nr example description
1 Car Engine and cluster data
1.0 46nnn Chassis nr/VIN serial number (last 5 digits)
1.1 4nnn K-number
1.2 690236 Cluster Part #
1.3 045210 Coding (04)/diagnosis (52)/bus index (10)
1.4 1200 Week (12)/year of manufacture (2000)
1.5 09_160 Hardware (09) and software # (16.0) of cluster
1.6 Not used
1.7 04__44 CAN-version (04) KI-revision index (44)
2 (test) Cluster System Test - Activates the gauge drivers,
indicators and LEDs to confirm function
3 SI Data
3.0 1098 Used fuel in liters since last SI (Service Inspection)
3.1 0231 Periodic inspection days; elapsed days (since last SI)
4 Momentary Consumption
4.0 0145+ Instant fuel consumption - 0145=14.5 liters/100km
4.1 0018 Instant fuel consumption - 0018=1.8 l/Hour
5 Distance Gone Consumption
5.0 082 Average mileage; 082=8.2 liters/100km
5.1 0536 Calc. km to refuel (momentary distance to go)
6 Fuel Level sensor inputs in liters
6.0 109330+ Fuel level averaged; Left half sensor input=10.9 liters; Right sensor input=33.0 liters
6.1 0439+ Total tank level averaged; vlgs 6.0: 10.9+33.0=43.9 liters
6.2 0442+ Indicated value (44.2) and tank phase
7 Temperature and Speed
7.0 021+ Coolant/Engine temperature (2.1C)
7.1 130 Ambient/Outside temperature - chg met 5 pts. 125/130/135
7.2 + Engine speed / Current RPMs 1/min
7.3 + Vehicle speed / Current Speed in km/hour
8 Input value in HEX form
8.0 1d0+ System voltage ADC-Value Hex code
8.1 26C33C+ ADC Values HG left/HG right
8.2 0000 ADC Value brake degradation sensor (000=o.k.)
8.3 18C ADC Value outside temperature
9 Battery
9.0 140 Battery Voltage - 140 = UB 14.0v
9.1 242013+?
9.2 074_78+?
9.3 0011+?
10 Not used
11 Not used
12 Not used
13 GonG Gong Test
14 Not used
15 Status cluster I/O-ports (bit codes) 0=low; 1=high
1st-belt contact, seat belt fastened=0; 2) ignition lock contact, key inserted=0; 3) door contact, door open=0; 4) clock button pressed=0; 5) SI reset=0, for reset=0; 6) EGS transmission failure=0
Status Digital Outputs (bits) 0=inactive, 1=active
1) Gong output; 2) Brake warning lamp; 3) Low fuel warning lamp; 4) EGA lamp; 5) seat belt lamp; 6) manipulation dot
16 Not used
17 Not used
18 Not used
19 Lock Status; unlocks functions in range 3-18
19.0 L-On/L-Off Unlock: press button when "L-Off"
20 Not used
21 Software Reset; reset OBC settings
00 End of test

^ im pretty sure that site just says pretty much all this lol.

[GreenSolara01]

Notice number six is NA.

Hmmm?