Good ground location / Remove backseat

[vSolara]

Today I did the wiring for a new subwoofer. I was able to run the main power, RCA and remote wire. But I can't find a good grounding location. I've read about the seat belt bolts, but I can't seem to get the bottom of the back seat off. How do I pull on it to get it off? Or, is there another location?

Thank you!

[ThatVietGuy]

Just grab the bottom cushion (the part you sit on) and pull up hard. Not much more to it than that...

[vSolara]

Thanks for the fast response, I'll try it out tomorrow.

[kenny6683]

i just drilled a small self tap screw down on the metal right behind back seat. worked light a charm

[MisterTedster]

^ x2

[cj145]

The best ground is into the frame rail somewhere in the trunk (assuming you don't run copper...). If you don't have a really high powered system you can use just about any place in the trunk. I used a thicker part of the rear seat brace behind the plastic cover.

[HydroponiK]

I went ghetto and used one of the holes under the rear speakers inside the trunk.

[pepowdylan]

I just screwed it onto the metal behind the back seat, works like a charm.