[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - 2 CEL codes, P0134 and P2237
Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.

2 CEL codes, P0134 and P2237

2 CEL codes, P0134 and P2237

Postby aznsensation » Thu Mar 12, 2009 4:21 pm

I originally got a P0135 code which was the bank 1 sensor 1 O2 sensor on my car. I bought a denso to replace it and all the check engine lights went away for about two days. Now when I drive about 15 or 20 miles, I get P0134 and P2237 which I believe are the same O2 sensor. I cleared out the codes and they came back. Any suggestions?
aznsensation
Just Licensed SolaraGuy
 
Posts: 9
Joined: Thu Feb 19, 2009 6:47 pm

Postby corlon » Sun Mar 15, 2009 10:10 pm

all codes are for the sensor. have you rechecked the wiring after the 2 codes came up. maybe the wire harness is near a heat source or got nicked/ cut?
NiCe
User avatar
corlon
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 788
Joined: Mon Nov 26, 2007 11:26 pm
Location: midwest

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 16 guests