[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - secondary O2 sensor question

Skip to content

Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.
Post a reply

secondary O2 sensor question

secondary O2 sensor question

Postby sahuddleston » Mon Jul 09, 2007 1:40 pm

hey guys, when i took out my turbo kit i was without a stock exhaust so i had one made at a local shop. i have my OEM headers in, and my O2 sensor is installed as it should be. my CEL is still on due to the fact that i have no secondary O2 sensor. i have thought about buying an O2 sensor and having a bung welded into the pipe to fix the CEL, i am unsure where the sensor should be installed and if theres an easier way to shut off the CEL. any help is appreciated guys. thanks
2012 Ford Shelby GT500
2013 Hyundai Genesis 4.6

2002 Toyota Solara SE - First Turbo 2AZ-FE
User avatar
sahuddleston
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1137
Joined: Fri Jul 15, 2005 8:29 pm
Location: AR
Top

Postby ozone » Tue Jul 10, 2007 12:47 pm

That is the right way to do it. Have the bung installed and put the O2 sensor in. The car will run better.
ozone
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 271
Joined: Thu Jul 27, 2006 9:54 pm
Top

Postby phillyclaude » Tue Jul 10, 2007 12:54 pm

I have a related question - my CEL came on recently and gave the O2 sensor code. I have heard that the O2 sensors are pretty straight forward to install yourself - like screwing it into the side of the exhaust pipe. Anyone have any advice or notes on doing this? I was going to grab a Chilton or Haynes manual and give it a shot. Thanks,
Claude
2000 Black Solara V6 5spd
phillyclaude
Just Licensed SolaraGuy
 
Posts: 32
Joined: Sun Oct 10, 2004 3:01 pm
Top
Post a reply

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 33 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net