Front Driver Pillar

[Dawgz]

How do i remove the front driver pillar? i want to mount the boost gauge on the pillar but i really dont know how to remove the pillar, anyone know the steps?

[hskrsolara]

remove the plastic runner that goes over the door, then the pillar pulls right out. it all clips in, so its pretty simple.

[Dawgz]

remove the plastic runner that goes over the door, then the pillar pulls right out. it all clips in, so its pretty simple.

I dont get it...

[Dawgz]

remove the plastic runner that goes over the door, then the pillar pulls right out. it all clips in, so its pretty simple.

I dont get it...

[woa_its_j3ff]

OLD pic:


sorry if this is the only pic I got man. If you need something more in depth just let me know.

[hskrsolara]

I'm doing this all from memory, so bear with me.

sit in your drivers seat.

look directly above and to the left, where the top of the window meets the weather stripping. there you will see 1 long, plastic piece that runs from the front pillar to the back where the seat belt attaches.

remove this piece.

then, the front pillar plastic will slide up and out. done.

[Dawgz]

that piece that goes to the seatbelt part IS the front pillar.

[woa_its_j3ff]

^that's the piece you need to remove man.
my pic should show you exactly how to remove it sorta. it really ain't hard, it pops out. just use a flathead.